250mm Oilfield Shale Shaker Hdd Mud Recycling System
Hdd Mud Recycling System Oilfield Shale Shaker Factory
Product parameters
| Customized | YES |
| Capacity | 50-240 ㎥/h (200-1000 GPM) |
| Screen Area | 2.2-8.4 ㎡ |
| Separation Stage | 2stage / 3stage |
| Tank Volume | 5-30 ㎥ |
| Total Power | 25-184 Kw |
| Total Weight | 5.5-20 t |
| Land Transport Dimension (mm) | customized |
| Screen material | Polyurethane |
| Cyclone (mm) | 250 -900 |
| Impeller material | Cr26 |
| Application | Drilling |
| Specification | Can be customized according to requirements |
| Model | CSJ-FN-30C | CSJ-FN-60C | CSJ-FN-120C | CSJ-FN-200C |
| Capacity (m3/h) | 30 | 60 | 120 | 200 |
| Slurry pump | Model | DC-EHM-1.5C | DC-EHM-3C | DC-EHM-3C | DC-EHM-4C |
| Power (Kw) | 7.5 | 11 | 22 | 37 |
| Pressure (MPa) | 1.0~2.0 |
| Shale shaker | Power(Kw) | 1.5 | 2 | 3 | 3 |
| Vibration force(KN) | 30 | 40 | 60 | 60 |
Screen size (mm) | UP | 1400X600 | 1700x700 | 1900X1000 | 2100x1200 |
| Down | 1400X600 | 1700x700 | 1900X1000 | 2100x1200 |
| Cone Model | FN-100 | FN-150 |
| Cone Number | 3 | 6 | 12 | 8 |
| Separation size (μm) | 10-30 |
| Total Power (KW) | 9 | 13 | 25 | 40 |
| System Max.Size(mm) | 1650X1450X2150 | 2000X1600X2250 | 2170X2000X2400 | 2400*2300*2400 |
| System weight (Kg) | 1200 | 1900 | 2500 | 3500 |
Introduction
The HDD drilling fluid recovery system is designed for horizontal
directional drilling rigs (HDD).
According to the needs of drilling mud, HDD mud recovery system can
include vibrating screen, desilting cyclone, desilting cyclone,
decanter centrifuge, mud tank, mud agitator, mud gun, transfer
pump, etc. The mesh size of the vibrating screen will be based on
the performance of the vibrating screen for mud flow and drilling
mud separation, and in different mud requirements.
Advantages
1. Modular design, small footprint, flexible configuration and
installation according to customer requirements.
2. The side plate of the mud tank is designed as a corrugated
load-bearing type, which is safe and reliable, and can withstand
larger loads.
3. The system adopts electric centralized control, which is easy to
operate.
4. All the equipment are designed with corrosion resistance and
wear resistance, with long service life.
5. Suitable for harsh drilling conditions, cold resistance, heat
resistance, explosion-proof, leak-proof, corrosion-resistant, and
rain-proof.
6. Simple installation and disassembly, convenient for frequent
movement of drilling personnel.
Main structural features
1. Good capacity and performance: The system capacity can reach
240m3/h (1000GPM), which can meet the slurry treatment of
large-scale trenchless projects.
2. All parts of the equipment are connected quickly, easy to
disassemble and save time.
3. The high-abrasion resistant polyurethane cyclone separator is
the same as the international brand, and can be used for more than
3800 hours, with long service life and good interchangeability.
4. Explosion-proof lamps meet the requirements of night
construction, easy to operate, safe and reliable.
HDD mud recovery system working procedures
1. There is a drilling rig on each side of the drilling rig, and a
set of vertical mud pumps are installed on the top of the drilling
rig to feed the vibrating screen. The shale shaker separates the
drilling cuttings, and the fluid part falls into the sand trap
through the screen holes.
2. After 1 or 2 or 3 sets of desander cyclones sit on the vibrating
screen, a set of centrifugal pumps will separate the desander
cyclong in the second stage, and the solid desander will discharge
the vibrating screen or directly cut the box and the liquid flow
desander Will flow into the desander chamber.
3. After the de-sander, a certain number of de-sand cyclones will
be placed to separate fine particles. The solids except the de-sand
will be discharged into the vibrating screen or cuttings box, and
the fluid in the de-sand will enter the de-sand chamber .
4. The mixing pump is installed on the anti-skid chute to transport
drilling mud and inject mud into the mud bucket to remix the new
mud with the new chemicals. The mixing hopper can be installed on
top of the tank or on the slider upon customer's request.
Pic Show
FAQ:
1. How to order products?
Please send an inquiry with a detailed item description or model
number.
2. How about ordinary packaging?
A: If there is no special packaging requirement, we will handle it
as normal packaging. Put them in a small carton first, and then put
them in a big carton together to ensure that the goods are
complete.
3. Can I expect high-quality products?
Yes. Mature production technology ensures that product quality
meets international requirements.
4. How to confirm whether the product is what you want?
A: If possible, please attach reference pictures to avoid
misunderstanding, or any link to our website for better
understanding.
5. How to control the quality?
A: We have our own experienced quality control team, and every
order is rigorously checked and tested before shipment.
6. Fast delivery time:
A: Usually production takes 25 days. If we have the stock size you
requested, it only takes 3-5 days.
7. Competitive price:
A: Our factory can provide you with the lowest price and sell
directly to customers, no distributors are needed!
